AM vs RF EAS systems: which anti-theft technology to choose

Updated 2026-11-21 · 3 min

Short answer

AM systems operate at 58 kHz, RF at 8.2 MHz, and they are not compatible. AM labels are more reliable near metal, foil and liquids, and the antennas can stand further apart, so AM is now the first choice for supermarkets, drugstores and electronics. RF labels are thinner and cheaper and still used in some boutique and bookstore systems. Before buying labels, check your antenna technology.

When a retailer asks about anti-theft antennas, the first question they hear is: AM or RF? Both technologies do the same job, but in different ways, and the choice affects which merchandise you can protect, how wide an entrance one pair of antennas covers and which labels you will be buying for years to come.

What AM and RF mean

  • AM (acousto-magnetic) technology operates at 58 kHz. The label contains thin metal strips that vibrate when hit by a pulse from the antenna, and the antenna "hears" that vibration between pulses.
  • RF (radio frequency) technology operates at around 8.2 MHz. The label contains a printed circuit with a capacitor that resonates at that frequency.

The most important rule: antennas, labels, tags and deactivators must all use the same technology. An RF label will not trigger an AM antenna, and an AM deactivator will not deactivate an RF label.

AM vs RF comparison

FeatureAM (58 kHz)RF (8.2 MHz)
Performance near metal and foilGoodWeaker, foil and metal interfere with the signal
Products containing liquidGoodWeaker
Spacing between antennasUsually about 2 m for labelsUsually narrower
Label appearanceThicker, narrow stripThin, flat, can be printed
Label priceUsually somewhat higherUsually lower
DeactivationMagnetic, on the deactivator padRadio frequency, on a pad or scanner
Typical useSupermarkets, drugstores, electronics, toolsBoutiques, bookstores, some clothing chains

The spacing figures are indicative: actual detection range depends on the antenna model, the type of tag or label and the environment.

Why supermarkets mostly choose AM

A supermarket has lots of goods in foil, cans and bottles, checkouts close to the exit and wide entrances. On such merchandise an AM system misses less often and produces fewer false alarms, and wider antenna spacing means fewer antennas per entrance. This is why major manufacturers have shifted their ranges to AM, and Dahua bases its current EAS range on AM technology (its RF antenna has been discontinued).

When RF still makes sense

If you already have RF antennas that work well, there is no reason to replace them just because of the technology. RF labels are thin and can be printed as price labels, which suits some boutique and bookstore systems. Problems arise when an RF system has to protect goods in foil or metal, or when the entrance is widened.

How to check which technology you have

  1. Look at the marking on the antenna or the control unit: it often says 58 kHz (AM) or 8.2 MHz (RF).
  2. Look at the label you currently use: an AM label is a narrow, slightly thicker strip that does not bend easily; an RF label is thin, square or rectangular, with a visible coil when held up to the light.
  3. If you are not sure, send us a photo of the antenna and the label and we will tell you.

Frequently asked questions

Can one store have both AM and RF?

Technically yes, with two separate antenna systems, but it rarely pays off. It is better to choose one technology for the whole store.

Do AM labels work with antennas from other manufacturers?

AM systems from different manufacturers operate at the same 58 kHz frequency, so the labels generally work. Even so, we always test a sample on your antenna before a larger order.

Which is better for a clothing store?

Clothing is mostly protected with hard tags, which are available in both AM and RF versions. If you also sell cosmetics or packaged accessories, AM covers all types of merchandise with a single system.

How much does switching from RF to AM cost?

It depends on the number of entrances and checkouts. With rental, the equipment replacement can be handled without a large upfront investment. See rental and monitoring.

Tell us about your store

Send us the number of stores, entrance widths and what you sell. We reply with a proposal: purchase or rental, with or without monitoring.